[opensuse-arm] Factory: boot.scr not updated
Hi, after testing some factory images, it appears that boot.scr/boot.script are not updated, so board is unbootable after first boot. Anything changed in config or kiwi? Guillaume -- To unsubscribe,...
View ArticleRe: [opensuse-arm] Image repos needs cleanup
Hello! Is it possible to replace those 13.2 images that do not boot properly with the working ones?
View ArticleRe: [opensuse-arm] Image repos needs cleanup
Le 28/05/2015 15:52, Ludwig Nussel a écrit : armv7 is not Tumbleweed. It really is Factory, ie the untested base of Tumbleweed. Some times ago, I have been told that for armv7 what is published _is_...
View ArticleRe: [opensuse-arm] Image repos needs cleanup
armv7 is not Tumbleweed. It really is Factory, ie the untested base of Tumbleweed. cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.de/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard,...
View Article[opensuse-arm] Image repos needs cleanup
Hi, in http://download.opensuse.org/ports/armv7hl/factory/images/ we need to remove all *Factory* images since they have been renamed *Tumbleweed*. Contrib repos should be affected too. Guillaume --...
View ArticleRe: [opensuse-arm] kiwi - Add bootflag to partition #2 when vboot is used
Le 28/05/2015 15:27, Alexander Graf a écrit : We should be able to do this in out u-boot-install and first boot script, no? Maybe, but you need parted or fdisk tool (not sure they are always...
View ArticleRe: [opensuse-arm] kiwi - Add bootflag to partition #2 when vboot is used
We should be able to do this in out u-boot-install and first boot script, no? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail:...
View Article[opensuse-arm] kiwi - Add bootflag to partition #2 when vboot is used
Hi Marcus, now, u-boot lists all bootable partitions to look for boot scripts. If no partition has a bootflag, it falls back to 1st partition. This break Chromebook (and maybe Raspberry Pi?) images,...
View ArticleRe: [opensuse-arm] Re: openQA : ARM qemu and real hardware?
Can I run openQA on my own real hardware? I would like to use openQA images instead on JeOS ones to test openSUSE on by BeagleBone Black. openQA just run ISO images (and maybe JeOS images for ARM...
View ArticleRe: [opensuse-arm] Re: openQA : ARM qemu and real hardware?
Le 28/05/2015 10:26, Matwey V. Kornilov a écrit : Can I run openQA on my own real hardware? I would like to use openQA images instead on JeOS ones to test openSUSE on by BeagleBone Black. openQA just...
View Article[opensuse-arm] Re: openQA : ARM qemu and real hardware?
27.05.2015 15:32, Guillaume Gardet пишет: Can I run openQA on my own real hardware? I would like to use openQA images instead on JeOS ones to test openSUSE on by BeagleBone Black.
View Article[opensuse-arm] openQA : ARM qemu and real hardware?
Hi, I know that some work have been done to get openQA working on ARM through qemu, but also on real hardware. What is working for now? I would like to perform some tests and maybe contribute, if I am...
View ArticleRe: [opensuse-arm] 2 Questions
Does "zypper ref" fix this? I guess you want "ncurses-devel"? Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail: opensuse-arm+owner@xxxxxxxxxxxx
View Article[opensuse-arm] 2 Questions
Hi, raspi-friends. I am trying to compile a ham-radio-terminal program TNT using OS-13.2-Jeos-Version downloaded on 28-2-15 , but I get two error messages when trying to install "ncurses-dev: using...
View ArticleRe: [opensuse-arm] RaspberryPi and openSuse 13.2
Yes, this is exactly the same issue I have. I found following temp solution: MAC can be set in /etc/sysconfig/network/ifcfg-eth0 LLADDR='ab:cd:00:01:02:03' 1.) cat /proc/cpuinfo > /etc/cpuinfo 2.)...
View ArticleRe: [opensuse-arm] RaspberryPi and openSuse 13.2
I have noticed a similar issue: http://lists.opensuse.org/opensuse-arm/2014-12/msg00039.html My workaround was to update the bootargs in boot.script to include: bcm2708.boardrev=0x10...
View ArticleRe: [opensuse-arm] RaspberryPi and openSuse 13.2
Op woensdag 20 mei 2015 04:00:21 schreef Thomas Aichinger: After first boot I look at the current MAC and add LLADDR='' in /etc/sysconfig/network/ifcfg-eth0 On the next boot the MAC will have that value.
View Article[opensuse-arm] RaspberryPi and openSuse 13.2
Hardware : BCM2708 Revision : 0010 Serial : 00000000c2c2clcfbb The problem is that many libs are looking into this information to determine what type of raspi they are running on. Furthermore serial...
View ArticleRe: [opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable...
It's part of the official Factory:ARM repository, because all upstream (non-contrib) boards use it. So this kernel conflicts with kernel-rpi2 or vice versa. Is it possible to keep Contrib synchronized...
View ArticleRe: [opensuse-arm] Updating RPi 2B image to kernel 4.0.1 leaves non-bootable...
Op dinsdag 19 mei 2015 18:07:19 schreef Alexander Graf: It's part of the official Factory:ARM repository, because all upstream (non-contrib) boards use it. So this kernel conflicts with kernel-rpi2 or...
View Article