Re: [opensuse-arm] Support for RPi camera in openSUSE for Rasberry Pi?
What do you need? raspberrypi-userland package provide some RPi tools such as: * raspistill * raspivid * raspividyuv * raspiyuv Otherwise, standard tool whould work too. Guillaume Thanks, one step...
View ArticleRe: [opensuse-arm] Support for RPi camera in openSUSE for Rasberry Pi?
Op donderdag 10 maart 2016 13:28:08 schreef Guillaume Gardet: What do you need? raspberrypi-userland package provide some RPi tools such as: * raspistill * raspivid * raspividyuv * raspiyuv Otherwise,...
View Article[opensuse-arm] Rpi2 Config.txt
Is there a reason the config.txt sets the speed of the cpu to 840mhz for the Rpi2 images? would this not be considered underclocking? I have however noticed that making changes to the config.txt also...
View ArticleRe: [opensuse-arm] Tumbleweed Raspberry Pi2 i2c-tools not work
Hi Denislav, Thank you for the report, this problem has been fixed in 4.1.19 (which is currently in :Staging) and later. Greetings, Dirk
View ArticleRe: [opensuse-arm] Support for RPi camera in openSUSE for Rasberry Pi?
Le 11/03/2016 10:44, Freek de Kruijf a écrit : What do you need? raspberrypi-userland package provide some RPi tools such as: * raspistill * raspivid * raspividyuv * raspiyuv Otherwise, standard tool...
View ArticleRe: [opensuse-arm] Support for RPi camera in openSUSE for Rasberry Pi?
I think the best way forward would be to just ignore the fact that raspistill even exists and try to find a tool that does what you need using the v4l interface :). I found a list of tools with a...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
It gets added to the kernel command line by the pre_checkin.sh script. Now I see, I've grepped rootfsflags instead of rootflags. Meh, I always get those wrong :). Phew. So with EFI enabled, we need to...
View ArticleRe: [opensuse-arm] Re: Which ARMv8 board to choose?
65 hours remaining for this 19-29$ Kickstarter project w/ Allwinner A64: https://www.kickstarter.com/projects/pine64/pine-a64-first-15-64-bit-singl e-board-super-comput IMHO that one looks very...
View ArticleRe: [opensuse-arm] RPi 3 in transit via UPS
Hi Jimmy, Yes, it seems to work right now, however the Staging media is my personal playground. don't use it if you expect something that works. please use...
View ArticleRe: [opensuse-arm] Support for RPi camera in openSUSE for Rasberry Pi?
Hi Freek, did you raise gpu memory to at least 128MB as advertised in http://raspberrypi.stackexchange.com/questions/14229/how-can-i-enable-the-camera-without-using-raspi-config you can only use the...
View Article[opensuse-arm] Re: Which ARMv8 board to choose?
21.01.2016 18:21, Guillaume Gardet пишет: 65 hours remaining for this 19-29$ Kickstarter project w/ Allwinner A64: https://www.kickstarter.com/projects/pine64/pine-a64-first-15-64-bit-singl...
View ArticleRe: [opensuse-arm] Support for RPi camera in openSUSE for Rasberry Pi?
Op zondag 13 maart 2016 15:01:19 schreef Alexander Graf: What do you need? raspberrypi-userland package provide some RPi tools such as: * raspistill * raspivid * raspividyuv * raspiyuv Otherwise,...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
2016-03-13 19:16 GMT+03:00 Alexander Graf : My guess is that the device tree doesn't get loaded. Do you see a warning about it on serial? Try to add a line in grub2 to manually select the device tree:...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
My guess is that the device tree doesn't get loaded. Do you see a warning about it on serial? Try to add a line in grub2 to manually select the device tree: Press e (edit current entry) at the end,...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
2016-03-13 18:20 GMT+03:00 Alexander Graf : My guess is that the device tree doesn't get loaded. Do you see a warning about it on serial? Try to add a line in grub2 to manually select the device tree:...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
2016-03-13 18:35 GMT+03:00 Alexander Graf : Maybe it's the wrong address after all. Try to run "nm" on the vmlinux binary (should be gzipped in /boot) and check for all occurences of log_buf (and...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
Maybe it's the wrong address after all. Try to run "nm" on the vmlinux binary (should be gzipped in /boot) and check for all occurences of log_buf (and __log_buf). 0xc0000000 is the "start of physical...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
My guess is that the device tree doesn't get loaded. Do you see a warning about it on serial? Try to add a line in grub2 to manually select the device tree: Press e (edit current entry) at the end,...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
2016-03-13 18:11 GMT+03:00 Alexander Graf : My guess is that the device tree doesn't get loaded. Do you see a warning about it on serial? Try to add a line in grub2 to manually select the device tree:...
View ArticleRe: [opensuse-arm] u-boot+EFI: how to debug grub2?
My guess is that the device tree doesn't get loaded. Do you see a warning about it on serial? Try to add a line in grub2 to manually select the device tree: Press e (edit current entry) at the end,...
View Article