Re: [opensuse-arm] cubox-i wireless setup
Which kernel module are you missing? Can you check in the config if it is enabled? Regards, Matthias -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail:...
View Article[opensuse-arm] Kernel bug in runtime-wrappers.c
Hi all, Just for information, I ran into a kernel bug on my R120-P31 kernel (yes, another one :-)) and I have opened a bug for this: https://bugzilla.suse.com/show_bug.cgi?id=1015378 It's on openSUSE...
View ArticleRe: [opensuse-arm] cubox-i wireless setup
I checked the kernel config and they are all build as modules. I think that is not needed. Your device should have a BCM4330 or BCM4329 and both are supported by upstream kernel (afaik). The problem I...
View ArticleRe: [opensuse-arm] User name and Passwd
That's what's documented at https://en.opensuse.org/HCL:Raspberry_Pi3#Installing_the_64-bit_openSUSE_Leap_image and what worked for me. Robert
View ArticleRe: [opensuse-arm] User name and Passwd
Did you try the default root password for openSUSE, "linux"? Regards, Matthias
View Article[opensuse-arm] User name and Passwd
Thanks to Roger Oberholtzer I installed the Raspipi 3B file /openSUSE-Leap42.2-ARM-JeOS-raspberrypi3.aarch64-2016.11.25- Build1.9.raw.xz It took approx. 10 min. to ask for Username and Password. Can...
View ArticleRe: [opensuse-arm] Raspi 3B: doesn't start correctly
I get the exact same thing. I left it for an hour (other things to do) and nothing changed. So I am using Leap 42.2. And that works fine. I have been fighting with Tumbleweed releases on the Raspberry...
View Article[opensuse-arm] Raspi 3B: doesn't start correctly
Hallo, Raspbi-friends. I have download last sunday 2 Versions, but after installation te boot-activity stopped. 1. Version: openSUSE-Tumblewéed-ARM-E20-raspberrypi3-2ß16-11-23-Build4.21.raw.gz 2....
View ArticleRe:Re: [opensuse-arm] User name and Passwd
Hallo, Linuxer. Vielen Dank für die vielen Hinweise. Es hat "natürlich" geklappt. Schönen 4. Advent MfG Edgar Dombrowski, DJ3PU, München -- To unsubscribe, e-mail:...
View Article[opensuse-arm] Raspberry Pi2 images not booting
Hi, It looks like none of the current TW images for Rpi2 are working. Am I correct or struck by the coincedence of three faulty SD cards that do work with other distros?
View ArticleRe: [opensuse-arm] Raspberry Pi2 images not booting
Op maandag 19 december 2016 19:49:04 CET schreef Andreas Färber: Hm, 4.8 and 4.9 kernels and both 2016.09 and 2016.11 U-Boot are working fine on my rpi2. Your message is lacking a lot of details. Like,...
View ArticleRe: [opensuse-arm] zypper issues on Raspberry PI3
openSUSE-Leap42.2-ARM-JeOS-raspberrypi3.aarch64-2016.11.25-Build1.9.raw.xz I have added ARM Factory, and my own repository with a few packages. I'm trying to keep this simple. I have done updates, and...
View ArticleRe: [opensuse-arm] zypper issues on Raspberry PI3
Which image do you use? openSUSE-Leap, openSUSE-Tumbleweed or SLE12-SP2? Have a look at /etc/zypp/zypp.conf and search for gpgcheck. Regards, Matthias -- To unsubscribe, e-mail:...
View Article[opensuse-arm] zypper issues on Raspberry PI3
I am trying to update my Raspberry PI3, and have a couple issues: 1. I can't seem to get zypper to download...
View ArticleRe: [opensuse-arm] Raspberry Pi2 images not booting
Hi Gertjan, Am 19.12.2016 um 15:57 schrieb Knurpht - Gertjan Lettink: Hm, 4.8 and 4.9 kernels and both 2016.09 and 2016.11 U-Boot are working fine on my rpi2. Your message is lacking a lot of details....
View ArticleRe: [opensuse-arm] Re: zypper issues on Raspberry PI3
You mean you installed kernel-firmware-20161130-1.1.noarch.rpm from http://download.opensuse.org/ports/aarch64/factory/repo/oss/suse/noarch/ without any problem? Strange. I cannot even download the...
View ArticleRe: [opensuse-arm] Re: zypper issues on Raspberry PI3
You mean you installed kernel-firmware-20161130-1.1.noarch.rpm from http://download.opensuse.org/ports/aarch64/factory/repo/oss/suse/noarch/ without any problem? Strange. I cannot even download the...
View ArticleRe: [opensuse-arm] Re: zypper issues on Raspberry PI3
Op woensdag 21 december 2016 12:35:01 CET schreef Roger Oberholtzer: If I try to download this file direct, the entire file seems not to be gotten. I get 40726634 bytes. But the Details in the download...
View Article[opensuse-arm] Re: zypper issues on Raspberry PI3
If I try to download this file direct, the entire file seems not to be gotten. I get 40726634 bytes. But the Details in the download page claims: Size: 39M (40759402 bytes) Last modified: Thu, 08 Dec...
View ArticleRe: [opensuse-arm] Cross compiling ARM on x64
Would it matter if host tools install in host paths? I think it would be fine to also be installer in /usr/bin, /usr/lib. I just need to make sure that /usr/bin/gcc and all are not replaced so they...
View Article