Re: [opensuse-arm] Fail with openSUSE JeOS pine 64 image
Is the Leap 42.3 release working with Pine64? The 42.3 kernel has to many missing parts to really work on A64. Your best bet is possibly running U-boot 2017.11 + Linux 4.15.x + Leap userland. Kernel...
View ArticleRe: [opensuse-arm] Fail with openSUSE JeOS pine 64 image
Is the Leap 42.3 release working with Pine64? The 42.3 kernel has to many missing parts to really work on A64. Your best bet is possibly running U-boot 2017.11 + Linux 4.15.x + Leap userland. Kernel...
View ArticleRe: [opensuse-arm] Fail with openSUSE JeOS pine 64 image
Is the Leap 42.3 release working with Pine64? I didn't try. I don't think it is built, is it ? If it is built, I am volunteering to test it. thx -- To unsubscribe, e-mail:...
View ArticleRe: [opensuse-arm] Fail with openSUSE JeOS pine 64 image
Is the Leap 42.3 release working with Pine64? I didn't try. cu Ludwig -- (o_ Ludwig Nussel //\ V_/_ http://www.suse.com/ SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284...
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
Am 12.01.2018 um 22:43 schrieb Brüns, Stefan: zypper in gptfdisk sgdisk -z $card
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
Op vrijdag 12 januari 2018 22:47:16 CET schreef Brüns, Stefan: better # change X to the letter of the device with the SD card card=/dev/sdX ssize=$(/usr/sbin/blockdev --getss $card) [ $ssize -ne 512 ]...
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
[...] should be size=`/usr/sbin/blockdev --getsize64 $card` dd if=/dev/zero of=$card obs=1 seek=$((size - 1024)) count=1024 or just --- wipefs --all /dev/sdX --- Although the above command removes the...
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
Op vrijdag 12 januari 2018 22:47:16 CET schreef Brüns, Stefan: Indeed that's the solution. I will document it on en.opensuse.org after some experimatation with sector as unit, because this gives an...
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
Tried again with a new 16 GB microSD card, which succeeded. I collected on the console the boot output, logged in and typed "fdisk -l /dev/mmcblk0", both using this 16 GB card and an 8 GB card. The 8...
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
Tried again with a new 16 GB microSD card, which succeeded. I collected on the console the boot output, logged in and typed "fdisk -l /dev/mmcblk0", both using this 16 GB card and an 8 GB card. The 8...
View ArticleRe: [opensuse-arm] Tumbleweed image for Raspberry Pi 2 contains a corrupt...
Op woensdag 10 januari 2018 13:42:27 CET schreef Freek de Kruijf: I also tried the RPi2 image for Leap 42.3 from repository: http://download.opensuse.org/ports/armv7hl/distribution/leap/42.3/appliances...
View ArticleRe: [opensuse-arm] Old ARM boards status
Le 26/01/2018 à 14:24, Andreas Färber a écrit : Thanks! Please don't remove HCL Wiki pages for existing hardware. "Supported" is a very strong word - let's say there is a low number of Highbank...
View ArticleRe: [opensuse-arm] Old ARM boards status
Hi Guillaume, Am 26.01.2018 um 11:53 schrieb Guillaume Gardet: Thanks! Please don't remove HCL Wiki pages for existing hardware. "Supported" is a very strong word - let's say there is a low number of...
View ArticleRe: [opensuse-arm] Repository for openSUSE Tumbleweed architecture aach64 is...
Op donderdag 25 januari 2018 13:07:03 CET schreef Freek de Kruijf: Hallo Andeas, I looked on this page and revieuwed the failures for OpenQA for Build20180113 and found some simple errors (probably...
View Article[opensuse-arm] Old ARM boards status
Hi, I updated HCL pages on the wiki for ARM devices by removing links to images which are unavailable (12.x, 13.x, etc.) and by adding TW and 42.3 links when images are available. Two boards seem to...
View ArticleRe: [opensuse-arm] Serial line after booting Raspberry Pi 3 with Tumbleweed...
The serial line is called ttyS1 with recent upstream device trees. Also, you should have a console= parameter for that in your kernel command line already. Care to paste the contents of /proc/cmdline?...
View Article[opensuse-arm] Serial line after booting Raspberry Pi 3 with Tumbleweed does...
I did put the image: openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3.aarch64-2018.01.19-Build3.3.raw.xz on a micro-SD card and booted the system with the serial line connected. I get some data on that serial...
View ArticleRe: [opensuse-arm] openSUSE-Tumbleweed ARM JeOS-efi.armv7
2018-01-25 11:49 GMT+03:00 Matwey V. Kornilov : It basically passes through the device tree that's generated by QEMU, yes. However, OVMF defaults changed a while back and it only exposes ACPI tables...
View ArticleRe: [opensuse-arm] Repository for openSUSE Tumbleweed architecture aach64 is...
Op maandag 22 januari 2018 21:20:06 CET schreef Andreas Färber: Hallo Andeas, I looked on this page and revieuwed the failures for OpenQA for Build20180113 and found some simple errors (probably just 2...
View ArticleRe: [opensuse-arm] openSUSE-Tumbleweed ARM JeOS-efi.armv7
2018-01-25 11:11 GMT+03:00 Matwey V. Kornilov : It basically passes through the device tree that's generated by QEMU, yes. However, OVMF defaults changed a while back and it only exposes ACPI tables...
View Article