Re: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
I patch and compile the kernel, replace the zImage in the factory image but the kernel does not start as the old kernel here is the new kernel i build, could you check is on older verison board whether...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
Let me try a generic linux approach for the same: on xubuntu 12.04 (yeah, I know it is sacrilege in a suse list ;) ): sudo apt-get install gcc-arm-linux-gnueabi you could alternatively pick up a cross...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
Is there any instrucution I could follow to compile the kernel or build a image for panda board B3 2014-02-21 5:36 GMT+08:00 Nishanth Menon : on my non B3 board: http://slexy.org/view/s2YhugU4oW (3.13)...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
on my non B3 board: http://slexy.org/view/s2YhugU4oW (3.13) http://slexy.org/view/s2mU9djKVq (3.14-rc3) Looking at the dts, I guessed there are cs1 is being attempted, could someone with a B3 board...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
The Uboot in Factory (u-boot 2014.01) works for RevB3, But the kernal fails.... Here follows the message: U-Boot SPL 2014.01 (Feb 05 2014 - 15:07:29) OMAP4460 ES1.1 U-Boot 2014.01 (Feb 05 2014 -...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
It seems to be a known problem. See: http://eewiki.net/display/linuxonarm/PandaBoard#PandaBoard-FAQ Not sure how it will affect other board revision if we rebuild u-boot without...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
Le 20/02/2014 11:54, 孙钰 a écrit : Before getting a new image for 13.1, you can try the Factory image which should already have u-boot 2014.01. Guillaume It seems to be a known problem. See:...
View ArticleRe: [opensuse-arm] Does NOT boot on Pandaboard-ES Rev B3
I will test the new image on RevB3 2014-02-18 23:05 GMT+08:00 Guillaume Gardet : It seems to be a known problem. See: http://eewiki.net/display/linuxonarm/PandaBoard#PandaBoard-FAQ Not sure how it will...
View Article[opensuse-arm] Re: Beaglebone black 13.1 JEOS
Patches to the kernel-source, http://lists.opensuse.org/opensuse-kernel/2014-01/msg00031.html maybe I did something wrong... -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact...
View ArticleRe: [opensuse-arm] Re: Beaglebone black 13.1 JEOS
Hi, Le 28/02/2014 14:41, Matwey V. Kornilov a écrit : They are supposed to be suitable both for beaglebone and beaglebone black. They are utilizing the same TI platform:...
View Article[opensuse-arm] Re: Beaglebone black 13.1 JEOS
They are supposed to be suitable both for beaglebone and beaglebone black. They are utilizing the same TI platform: http://beagleboard.org/products/beaglebone...
View ArticleRe: [opensuse-arm] Beaglebone black 13.1 JEOS
I think this image is for beaglebone black. Not sure if it suitable for beaglebone. Guillaume Le 28/02/2014 09:23, lists a écrit :
View Article[opensuse-arm] Re: Re : Re: Re : Re: Re : Re: [opensuse-arm] Issues booting...
Le 27/02/2014 18:43, Andrew Wafaa a écrit : You still have an old image. I mean your image does not include all your patches for u-boot. Try to type: mmc dev 1 (or mmc dev 0) mmc rescan load mmc 0:1...
View Article[opensuse-arm] Beaglebone black 13.1 JEOS
Is the JEOS for the Beaglebone suitable for the Beaglebone Black? Specifically as found on this page.
View Article[opensuse-arm] Re: Re : Re: Re : Re: Re : Re: [opensuse-arm] Issues booting...
[..] We do not use it, so I do not know. OK, I'm not sure if it's needed or not. I know Nishanth mentioned using it, but I don't think it's vital. you can choose either to use boot.scr or the newer...
View ArticleRe: Re : Re: Re : Re: Re : Re: [opensuse-arm] Issues booting OMAP5 board
Forgot to add 'source 0x82000000' to run boot.scr script. Because you are using a non patched u-boot. I copied u-boot from openSUSE:Factory:ARM, so how come it's unpatched, where can I get the correct...
View Article[opensuse-arm] Re : Re: Re : Re: Re : Re: [opensuse-arm] Issues booting OMAP5...
----- Andrew Wafaa a écrit : You still have an old image. I mean your image does not include all your patches for u-boot. Try to type: mmc dev 1 (or mmc dev 0) mmc rescan load mmc 0:1 0x82000000...
View Article[opensuse-arm] Re: Re : Re: Re : Re: [opensuse-arm] Issues booting OMAP5 board
You still have an old image. I mean your image does not include all your patches for u-boot. Try to type: mmc dev 1 (or mmc dev 0) mmc rescan load mmc 0:1 0x82000000 boot.scr It should load your...
View Article[opensuse-arm] Re : Re: Re : Re: [opensuse-arm] Issues booting OMAP5 board
----- Andrew Wafaa a écrit : Sorry I forgot the pointer to the repo with the modified packages! https://build.opensuse.org/project/show/home:FunkyPenguin:ARM:OMAP5 According to your error message, you...
View ArticleRe: Re : Re: [opensuse-arm] Issues booting OMAP5 board
Just to be sure, you copy it in /boot folder on boot partition (1st partition)? It seems that your u-boot does not load boot.scr. Could you stop auto boot and give us the result of the 'print'...
View Article