Re: [opensuse-arm] OS13.1: Raspi started den Grafik Modus nicht
Hi, Freek. Thank you for your advice. to proceed according the infos provided in the HCL-File. However I installed meantime the openSuSe-13.2 and the occured questions will listed separatly. Thanks...
View ArticleRe: [opensuse-arm] Build armv7l rpm on x86_64 host
The standard repo is set up for native builds on armv7l, so that won't work. The qemu repo is the correct one to use for qemu user space builds. It inherits from the standard repo, so all packages are...
View ArticleRe: [opensuse-arm] Build armv7l rpm on x86_64 host
Hi Mariusz, Am 13.01.2015 um 01:09 schrieb Mariusz Fik: That should not be necessary. By default we locally build in a chroot, not in QEMU. Take a look at...
View Article[opensuse-arm] Re: Build armv7l rpm on x86_64 host
I will reach my working configuration at evening. I remember that I use kvm build-type here. I usually add --clean to avoid conflicts with previous content. -- To unsubscribe, e-mail:...
View Article[opensuse-arm] Re: Build armv7l rpm on x86_64 host
Try to set kvm here. I'll reach my working config only at evening. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail: opensuse-arm+owner@xxxxxxxxxxxx
View Article[opensuse-arm] Build armv7l rpm on x86_64 host
Hi, I'm rookie in ARM world. I bought recently odroid-c1 board, but it doesn't work with openSUSE yet. I'll try to make it happens (or fail trying). I read so far, I need vendor u-boot and kernel. All...
View ArticleRe: [opensuse-arm] Raspi-OS 13.2: with FBAS connection
You have to mount /dev/mmcblk0p1 somewhere to reach what the BIOS considers to be the boot partition. There you will find e.g. file Config.txt Ciao, Michael.
View Article[opensuse-arm] Raspi-OS 13.2: with FBAS connection
Hi, Raspi-friends. I am installing the 13.2-version for the raspberry. As a mostly operating in the text-mode, I am using a 7inch-monitor connected to the FBAS-connector. In works but on the left...
View ArticleRe: [opensuse-arm] Raspi-OS 13.2: with FBAS connection
Hi Edgar, Am 16.01.2015 um 13:38 schrieb Edgar Dombrowski: You have to mount /dev/mmcblk0p1 somewhere to reach what the BIOS considers to be the boot partition. There you will find e.g. file Config.txt...
View ArticleRe: Re:[opensuse-arm] Raspi-OS 13.2: with FBAS connection
Am 15.01.2015 15:55, schrieb Michael Ströder: You have to mount /dev/mmcblk0p1 somewhere to reach what the BIOS considers to be the boot partition. There you will find e.g. file Config.txt Ciao,...
View ArticleRe: [opensuse-arm] openQA: ARM
Ok, with some hints from Dirk and home:algraf:ARM-PCI/qemu I got openQA to boot an aarch64 iso on my workstation. There are still some issues that need to be resolved: -...
View ArticleRe: [opensuse-arm] openQA: ARM
Am 22.01.2015 um 06:08 schrieb Ludwig Nussel: Ok, with some hints from Dirk and home:algraf:ARM-PCI/qemu I got openQA to boot an aarch64 iso on my workstation. There are still some issues that need to...
View ArticleRe: [opensuse-arm] openQA: ARM
Am 06.01.2015 um 11:23 schrieb Ludwig Nussel: Ok, with some hints from Dirk and home:algraf:ARM-PCI/qemu I got openQA to boot an aarch64 iso on my workstation. There are still some issues that need to...
View ArticleRe: [opensuse-arm] Create new JeOS image
Hello Mariusz, Here is very brief description how i added paz00 board target https://paz00.ru/index.php/OpenSUSE_JeOS_bringup I plan to make it more detail and move to openSUSE wiki once finished. ---...
View Article[opensuse-arm] Create new JeOS image
Hi, I'm working on get openSUSE working with ODROID-C1 board. I prepared u-boot and kernel in my repo: https://build.opensuse.org/project/show/home:Fisiu:odroid-c1 Now I want to create new JeOS image...
View ArticleRe: [opensuse-arm] ports image on cubietruck - no luck so far
sure Could you attach the output of the serial console? The attached file is the log from reset of the board until the system is stuck, and after a reset I stoped the boot process and print the...
View ArticleRe: [opensuse-arm] Nexus 9 aarch64 how-to
Great. I wonder how you can make below cable by DIY. UART via headphone jack (DIY) Best Regards, Chanho Park -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner,...
View ArticleRE: [opensuse-arm] Nexus 9 aarch64 how-to
Hi, Great. I wonder how you can make below cable by DIY. UART via headphone jack (DIY) Best Regards, Chanho Park -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner,...
View ArticleRe: [opensuse-arm] ports image on cubietruck - no luck so far
El 2015-01-26 12:28, Stefan Botter escribió: The attached file is the log from reset of the board until the system is stuck, and after a reset I stoped the boot process and print the environment....
View Article