Re: [opensuse-arm] openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
Hi, I don't think it would work, as the serial port is behind a different IP block. Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail:...
View Article[opensuse-arm] openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
Hello, Could somebody please tell me whether raspberrypi2 image supposed to work on raspberrypi3 in armv7 mode? I've just tried but I don't see anything on serial console, even u-boot messages. Is it...
View ArticleRe: [opensuse-arm] Filesystem crashes with Leap 42.2 on rpi3
Sorry - cannot remember, was about 4-5weeks ago - Just for the record - now I rebooted the newly installed box and it worked without a problem.
View Article[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
12.04.2017 11:44, Fabian Vogt пишет: Unfortunately, It doesn't work for me... -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@xxxxxxxxxxxx To contact the owner, e-mail:...
View Article[opensuse-arm] Kernel 4.11-rc6 testing status
Hi, Update: Since Friday's second revision of 4.11.rc6 serdev now works. Amlogic S905 MMC support has just landed in U-Boot last night, allowing to finally migrate my two S905 devices over to our...
View Article[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
14.04.2017 17:37, Andreas Färber пишет: Unfortunately, It doesn't work for me... Have you set skip-init as instructed in the commit message? It is enabled by default in bcm283x-uboot.dtsi
View ArticleRe: [opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
Am 14.04.2017 um 12:17 schrieb Matwey V. Kornilov: Unfortunately, It doesn't work for me... Have you set skip-init as instructed in the commit message? Cheers, Andreas
View ArticleRe: [opensuse-arm] Odroid-C2
Odroid-C2 - boots OK (add fixed, gpio-regulator modules to dracut) [...] JeOS-odroidc2 is now bootable - available from Contrib:OdroidC2, instructions at https://en.opensuse.org/HCL:OdroidC2. Burned...
View ArticleRe: [opensuse-arm] Odroid-C2
Burned openSUSE-Tumbleweed-ARM-JeOS-odroidc2.aarch64-2017.04.21-Build3.1.raw.xz per instructions, does not boot. Only the red LED lights. It does here. Are you maybe looking at an HDMI screen instead...
View ArticleRe: [opensuse-arm] Odroid-C2
Burned openSUSE-Tumbleweed-ARM-JeOS-odroidc2.aarch64-2017.04.21-Build3.1.raw.xz per instructions, does not boot. Only the red LED lights. It does here. Are you maybe looking at an HDMI screen instead...
View ArticleRe: [opensuse-arm] Odroid-C2
Hi, Am 21.04.2017 um 17:00 schrieb Sid Boyce: Burned openSUSE-Tumbleweed-ARM-JeOS-odroidc2.aarch64-2017.04.21-Build3.1.raw.xz per instructions, does not boot. Only the red LED lights. It does here. Are...
View ArticleRe: [opensuse-arm] Odroid-C2
Hi Andreas, Burned openSUSE-Tumbleweed-ARM-JeOS-odroidc2.aarch64-2017.04.21-Build3.1.raw.xz per instructions, does not boot. Only the red LED lights. It does here. Are you maybe looking at an HDMI...
View ArticleRe: [opensuse-arm] Odroid-C2
Hi Sid, Am 21.04.2017 um 16:13 schrieb Sid Boyce: Hi Andreas, Burned openSUSE-Tumbleweed-ARM-JeOS-odroidc2.aarch64-2017.04.21-Build3.1.raw.xz per instructions, does not boot. Only the red LED lights....
View ArticleRe: [opensuse-arm] Odroid-C2
Odroid-C2 - boots OK (add fixed, gpio-regulator modules to dracut) [...] JeOS-odroidc2 is now bootable - available from Contrib:OdroidC2, instructions at https://en.opensuse.org/HCL:OdroidC2. Enjoy,...
View ArticleRe: [opensuse-arm] Odroid-C2
Am 20.04.2017 um 20:57 schrieb Andreas Färber: Odroid-C2 - boots OK (add fixed, gpio-regulator modules to dracut) [...] JeOS-odroidc2 is now bootable - available from Contrib:OdroidC2, instructions at...
View ArticleRe: [opensuse-arm] Odroid-C2
Am 18.04.2017 um 23:25 schrieb Andreas Färber: Odroid-C2 - boots OK (add fixed, gpio-regulator modules to dracut) [...] Short answer: None, I have not created a JeOS image yet. Just today was U-Boot...
View ArticleRe: [opensuse-arm] Odroid-C2
Am 19.04.2017 um 00:43 schrieb Sid Boyce: Odroid-C2 - boots OK (add fixed, gpio-regulator modules to dracut) [...] Short answer: None, I have not created a JeOS image yet. Just today was U-Boot...
View Article[opensuse-arm] Kernel 4.11-rc7 testing status
Am 19.04.2017 um 08:45 schrieb Andreas Färber: Odroid-C2 - boots OK (add fixed, gpio-regulator modules to dracut) Orange Pi PC 2 - stuck during earlycon * I enabled missing SUN8I_H3_CCU, should be in...
View Article[opensuse-arm] Re: openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 and RPi3
12.04.2017 13:25, Dirk Müller пишет: It was the idea at some point, but that has never been implemented. so no right now it will not work. openSUSE-Leap42.2-ARM-JeOS-raspberrypi2 with u-boot-rpi332b...
View ArticleRe: [opensuse-arm] Kernel 4.11-rc6 testing status
Hey, Using unmerged patches, I built a U-Boot for Orange Pi PC 2 and bootstrapped it from our Pine64 image (overwriting the bootloader with mine, and repeating that after first boot). Am 15.04.2017 um...
View Article